{"id":5960,"date":"2010-12-06T00:00:52","date_gmt":"2010-12-06T05:00:52","guid":{"rendered":"http:\/\/www.olino.org\/us\/?p=5960"},"modified":"2011-01-13T16:10:10","modified_gmt":"2011-01-13T21:10:10","slug":"using-a-ground-source-heat-pump-system-in-china","status":"publish","type":"post","link":"https:\/\/olino.org\/blog\/us\/articles\/2010\/12\/06\/using-a-ground-source-heat-pump-system-in-china\/","title":{"rendered":"Using a Ground Source Heat Pump System in China"},"content":{"rendered":"

\"\"<\/a>In March of 2009,\u00a0 I bought a house in my hometown \u2013 Jiaxing, which is in China.\u00a0 Jiaxing is located on the southeast coast line of China,\u00a0 120 km\u00a0 from Shanghai. The house I bought has an interior area of 250 m2 with 3 floors and a basement.\u00a0 It also comes with a garden of\u00a0 55 m2.\u00a0 With this house,\u00a0 I found an opportunity to try out a Ground Source Heat Pump system. For years I have been looking at the development of new trendy technologies.\u00a0 Now I am especially interested in new and renewable energies.\u00a0 By attempting to install such a Ground Source Heat Pump system in home,\u00a0 my intention is to use the ground heat for basic heating, cooling and providing all of the warm water needed for living in my home.<\/p>\n


\nWritten by Hanhua Zhang (translated and revised by Yuchen Zhang)<\/em><\/p>\n

The Ground-coupled Tubes<\/h3>\n

The very first level of heat exchanging happens in the ground, with water circulating in the so-called ground-coupled tubes (http:\/\/en.wikipedia.org\/wiki\/Geothermal_heat_pump<\/a>). In all there are 5 holes drilled in my garden, with each 96m deep and with a distance of 2.8 \u2013 3.5m between. The vertically inserted tubes are interconnected by horizontally laid tubes, which is 1.5m underneath the ground surface.<\/p>\n

\"\"<\/a>
\nGround-coupled tube<\/em><\/p>\n

\"\"<\/a>
\nThe tubes in the ground<\/em><\/p>\n

\"\"<\/a>
\nDrilling the hole in the ground and inserting the ground-coupled tube<\/em><\/p>\n

As shown in the photo, the laying of the ground tubes is accomplished by a group of specialized workers<\/p>\n

The Principle of the System<\/h3>\n

As shown in the figure below, the core of the whole system is the two heat exchangers. Each of the two is connected to both the ground tubes (source) and the indoor house pipes towards heating or cooling (load).\u00a0 Inside the machine there are yet two levels of heat exchanging. The source side has water circulating in the tubes to constantly absorb the heat from the earth, which is transferred to the internal refrigerant (Freon). After the internal heat is condensed, the heat is transferred to the load side through another level of exchange.\u00a0 In summer, the cooling of the house is achieved by ventilating air through the tubes with circulating cold water inside;\u00a0 in winter,\u00a0 the heating of the house is caused by the heat radiated from the subfloor circulating warm water. There are digital controllers,\u00a0 together with the solenoid valves, automatically adjusting the threshold\u00a0 temperature on a pre-set level.<\/p>\n

\"\"<\/a>
\nThe System With Two Heat Exchangers<\/em><\/p>\n

\"\"<\/a>
\nThe Two Heat Exchangers in the Basement<\/em><\/p>\n

In summer, the warm water in the house\u00a0 (for showers, washing, etc.) is heated by the recycled heat from the heat exchanger.\u00a0 Therefore, heating the warm water in summertime\u00a0 is basically free.\u00a0 In winter, the warm water is heated by the ground heat, using the same principle as subfloor heating. This still is 70% cheaper than using electricity. Together with a 200 liter tank, supplying 24-hour hot water in the whole house can be achieved.<\/p>\n

The Subfloor Heating<\/h3>\n

See the following figure for a symbolic drawing about the subfloor heating system in the house. It is the so-called \u201cRadiant Loops\u201d. (http:\/\/en.wikipedia.org\/wiki\/Underfloor_heating#Modeling_piping_patterns_with_finite_element_analysis<\/a>) that are buried under the floor to have warm water circulating inside.\u00a0 In my case,\u00a0 I used loops of 100 meters each for the radiation. As shown in the drawing,\u00a0 there are different amount of radiation loops deployed on different floors.\u00a0 The node between the main loop and radiation loops is called a \u201cRadiant Manifold\u201d, through which warm water flows into the radiation network and the colder water after circulation flows back to the main loop.<\/p>\n

\"\"<\/a>
\nA Symbolic Drawing of the Main and Radiant Loops<\/em><\/p>\n

\"\"<\/a>
\nThe Radiant Manifold in Living room (connected to 4 radiant loops x 100 meter)<\/em><\/p>\n

Return on Investment<\/h3>\n

The investment in the complete system, including purchasing and installing the two heat exchangers, drilling the holes in the garden and laying out the U-tubes,\u00a0 deploying the subfloor heating and ventilators for cooling,\u00a0 is around 145k\u00a0 RMB.\u00a0 This, using a Foreign Exchange Rate rate of 9 : 1, equals to 16K euro ($22K). Compared to a conventional air-conditioning and heating system (using electricity),\u00a0 this initial investment is around 70K RMB more,\u00a0 or 7.8K euro ($10K). On the other hand,\u00a0 such a system only consumes 1\/3 \u2013 1\/2 of the energy needed by a conventional air-conditioning or heating system.\u00a0 Assuming this system will be operating for 7-8 months of the year,\u00a0 a comparison with the conventional system for the same amount of time would mean a savings of 12K RMB per year on one’s energy bill.\u00a0 A rough estimation for the Return on Investment (ROI) is therefore is 6 years.\u00a0\u00a0 Note that the electricity tariff in Jiaxing is on average 60 RMB cents per kWh,\u00a0 or 6.7 euro cents (8.7 dollar cents) per kWh .<\/p>\n","protected":false},"excerpt":{"rendered":"

In March of 2009,\u00a0 I bought a house in my hometown \u2013 Jiaxing, which is in China.\u00a0 Jiaxing is located on the southeast coast line of China,\u00a0 120 km\u00a0 from Shanghai. The house I bought has an interior area of 250 m2 with 3 floors and a basement.\u00a0 It also comes with a garden of\u00a0 […]<\/p>\n","protected":false},"author":30,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[4,33],"tags":[34],"_links":{"self":[{"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/posts\/5960"}],"collection":[{"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/users\/30"}],"replies":[{"embeddable":true,"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/comments?post=5960"}],"version-history":[{"count":29,"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/posts\/5960\/revisions"}],"predecessor-version":[{"id":6730,"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/posts\/5960\/revisions\/6730"}],"wp:attachment":[{"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/media?parent=5960"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/categories?post=5960"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/tags?post=5960"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}