{"id":888,"date":"2009-02-03T01:00:25","date_gmt":"2009-02-03T01:00:25","guid":{"rendered":"http:\/\/www.olino.org\/us\/?p=888"},"modified":"2009-03-09T15:51:42","modified_gmt":"2009-03-09T20:51:42","slug":"an-energy-saving-doorbell","status":"publish","type":"post","link":"https:\/\/olino.org\/blog\/us\/articles\/2009\/02\/03\/an-energy-saving-doorbell\/","title":{"rendered":"An energy saving doorbell"},"content":{"rendered":"<p><a href=\"http:\/\/www.olino.org\/wp-content\/uploads\/2009\/01\/s6300814.jpg\" class=\"thickbox no_icon\"><img decoding=\"async\" loading=\"lazy\" class=\"alignright size-thumbnail wp-image-2520\" title=\"Deurbel\" src=\"http:\/\/www.olino.org\/wp-content\/uploads\/2009\/01\/s6300814-100x67.jpg\" alt=\"Deurbel\" width=\"100\" height=\"67\" \/><\/a>The energy consumption of an electrical doorbell is very inefficient. It uses energy 24 hours\/day while being used only a few seconds per day. In this article, I describe how I reduced the energy consumption of my doorbell.<\/p>\n<p><!--more--><\/p>\n<h3>My Doorbell System<\/h3>\n<p>My doorbell system consists of:<\/p>\n<ul>\n<li>Three pushbuttons at the door (three, because I have rooms for rent), all these pushbuttons have a small internal lamp for illuminating the nameplate.<\/li>\n<li>Four bells (one pushbutton is driving two bells).<\/li>\n<li>One transformer.<\/li>\n<\/ul>\n<p>For the amount of energy they consume annually, the few seconds of energy used when doorbells are actually in use is negligible. The energy consumption is determined by:<\/p>\n<ul>\n<li>The energy loss in the transformer.<\/li>\n<li>The power for the illumination of the pushbuttons.<\/li>\n<\/ul>\n<h3>The First Transformer<\/h3>\n<p>Years ago, my house had one doorbell with one pushbutton, powered by transformer 1 below.<\/p>\n<p>Input voltage: 220 Volt<br \/>\nOutput voltage: 8V (1A)<\/p>\n<p>This old transformer is from the time when the wall outlet voltage was 220 Volt here in the Netherlands, nowadays the wall outlet voltage is 230 V.<\/p>\n<p><a href=\"http:\/\/www.olino.org\/wp-content\/uploads\/2009\/01\/s6300798.jpg\" class=\"thickbox no_icon\"><img decoding=\"async\" loading=\"lazy\" class=\"alignnone size-medium wp-image-2525\" title=\"Transformator 1\" src=\"http:\/\/www.olino.org\/wp-content\/uploads\/2009\/01\/s6300798-400x316.jpg\" alt=\"Transformator 1\" width=\"400\" height=\"316\" \/><\/a><br \/>\n<em>Transformer 1<\/em><\/p>\n<h3>Bigger Transformator<\/h3>\n<p>Later I got three pushbuttons at the door, and I started using this larger transformer. The transformer had to be larger because the old transformer didn&#8217;t have enough power to drive two bells in parallel.<\/p>\n<p>Input voltage: 230 Volt<br \/>\nOutput voltage: 6 Volt (2A)<br \/>\nThe unloaded output voltage is about 6.6 volt.<\/p>\n<p>Though the bells are 8 Volt types, they also work o.k. on 6 Volt. The lamps in the pushbuttons however gives less light at 6V<\/p>\n<p><a href=\"http:\/\/www.olino.org\/wp-content\/uploads\/2009\/01\/s6300773.jpg\" class=\"thickbox no_icon\"><img decoding=\"async\" loading=\"lazy\" class=\"alignnone size-medium wp-image-2521\" title=\"Transformator 2\" src=\"http:\/\/www.olino.org\/wp-content\/uploads\/2009\/01\/s6300773-400x258.jpg\" alt=\"Transformator 2\" width=\"400\" height=\"258\" \/><\/a><br \/>\n<em>Transformer 2<\/em><\/p>\n<h3>Toroidal Transformer<\/h3>\n<p>To reduce the energy consumption, I replaced transformer 2 by this toroidal transformer. Such a toroidal transformer has much less energy losses then the previous two EI-core transformers.<\/p>\n<p>Input voltage: 230 volt<br \/>\nOutput voltage: 6 Volt (2.5 A)<br \/>\nThe unloaded output voltage is about 6.9 Volt.<\/p>\n<p>More info about power loss in transformers can be found in the article <a href=\"http:\/\/www.olino.org\/us\/articles\/2009\/01\/06\/saving-energy-with-the-toroidal-transformer\">Saving energy with the toroidal transformer<\/a>.<\/p>\n<p><a href=\"http:\/\/www.olino.org\/wp-content\/uploads\/2009\/01\/s6300774.jpg\" class=\"thickbox no_icon\"><img decoding=\"async\" loading=\"lazy\" class=\"alignnone size-medium wp-image-2526\" title=\"Ringkern transformator\" src=\"http:\/\/www.olino.org\/wp-content\/uploads\/2009\/01\/s6300774-400x300.jpg\" alt=\"Ringkern transformator\" width=\"400\" height=\"300\" \/><\/a><br \/>\n<em>Toroidal transformer<\/em><\/p>\n<h3>The Measurements<\/h3>\n<p>In the next measurement the input power is measured for the three transformers. One time unloaded, and one time loaded with the (lamps in the) three pushbuttons.<\/p>\n<table border=\"0\">\n<tbody>\n<tr>\n<th><\/th>\n<th>Input power<br \/>\n(Watt)<br \/>\nOutput unloaded\n<\/th>\n<th>Input power<br \/>\n(Watt)<br \/>\nOutput loaded<\/th>\n<\/tr>\n<tr>\n<th>Transformer 1<\/th>\n<td>1.86<\/td>\n<td>2.78<\/td>\n<\/tr>\n<tr>\n<th>Transformer 2<\/th>\n<td>1.85<\/td>\n<td>2.45<\/td>\n<\/tr>\n<tr>\n<th>Toroidal transformer<\/th>\n<td>&lt; 0.50 *<\/td>\n<td>0.92<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>* My <a href=\"http:\/\/www.dicks-website.eu\/energiemeter\/enindex.html\" title=\"Rebuilding an energymeter for higher measuring accuracy\" target=\"_blank\">energy meter<\/a> cannot measure below 0.50 Watt.<\/p>\n<p>The result: the toroidal transformer uses the least energy.<\/p>\n<h3>LED Lights in the Pushbutton<\/h3>\n<p>To reduce the energy consumption even further, I replaced the light bulbs in the pushbuttons with LED&#8217;s. The original light bulbs used about\u00a0 30 mA a piece (at 6.9 Volt transformer voltage). So the total power for the 3 lamps is: 3 lamps x 30 mA x 6.9 Volt = 0.621 Watt.<\/p>\n<p><a href=\"http:\/\/www.olino.org\/wp-content\/uploads\/2009\/01\/schema1.jpg\" class=\"thickbox no_icon\"><img decoding=\"async\" loading=\"lazy\" class=\"alignnone size-medium wp-image-2524\" title=\"schema1\" src=\"http:\/\/www.olino.org\/wp-content\/uploads\/2009\/01\/schema1-400x146.jpg\" alt=\"schema1\" width=\"400\" height=\"146\" \/><\/a><\/p>\n<p><em>Left: the original circuit diagram with the light bulb parallel to the switch.<\/em><br \/>\n<em>Right: circuit diagram of the led illumination.<\/em><\/p>\n<p>I used two white 3 mm led&#8217;s , with 2800 mcd brightness at 20 mA. One led illuminates the transparent circle around the pushbutton. The other led illuminates the nameplate. The light bulb is disconnected.<\/p>\n<p><a href=\"http:\/\/www.olino.org\/wp-content\/uploads\/2009\/01\/s6300789.jpg\" class=\"thickbox no_icon\"><img decoding=\"async\" loading=\"lazy\" class=\"alignnone size-medium wp-image-2523\" title=\"Ledjes in de deurbel\" src=\"http:\/\/www.olino.org\/wp-content\/uploads\/2009\/01\/s6300789-400x272.jpg\" alt=\"Ledjes in de deurbel\" width=\"400\" height=\"272\" \/><\/a><br \/>\n<em>The led&#8217;s and resistor build in the pushbutton.<\/em><\/p>\n<p>The illumination for one pushbutton now uses 3.8 mA a.c., which is quite less then the 30 mA it was first. Compared to the light bulb, the brightness of the led&#8217;s is much higher.<\/p>\n<p><a href=\"http:\/\/www.olino.org\/wp-content\/uploads\/2009\/01\/s6300803.jpg\" class=\"thickbox no_icon\"><img decoding=\"async\" loading=\"lazy\" class=\"alignnone size-medium wp-image-2522\" title=\"Verlichting deurbel bij nacht\" src=\"http:\/\/www.olino.org\/wp-content\/uploads\/2009\/01\/s6300803-400x368.jpg\" alt=\"Verlichting deurbel bij nacht\" width=\"400\" height=\"368\" \/><\/a><br \/>\n<em>The illumination at night.<\/em><\/p>\n<h3>Voltage Spikes<\/h3>\n<p>When the bell is ringing, it can produce high voltage spikes, by which the led&#8217;s (maybe) can get defective. To prevent this, I connected a 25 Volt a.c. varistor parallel to the bell. The varistor reduces the peaks to about 40 Volt, which is a safe value.<br \/>\nThe value of the varistor may lay between 10 and 25 Volt a.c.<\/p>\n<p><a href=\"http:\/\/www.olino.org\/wp-content\/uploads\/2009\/01\/s6300814.jpg\" class=\"thickbox no_icon\"><img decoding=\"async\" loading=\"lazy\" class=\"alignnone size-medium wp-image-2520\" title=\"Deurbel\" src=\"http:\/\/www.olino.org\/wp-content\/uploads\/2009\/01\/s6300814-400x268.jpg\" alt=\"Deurbel\" width=\"400\" height=\"268\" \/><\/a><br \/>\n<em>The bell with between it&#8217;s terminals the varistor (round blue component).<\/em><\/p>\n<h3>Significant Energy Saving<\/h3>\n<p>After replacing the light bulbs with LED&#8217;s, I measured again the energy consumption of the toroidal transformer, loaded with the three pushbuttons. My energy meter indicated 0.00 Watt, which means the consumption is below 0.5 Watt. Then I connected a small load to the energy meter, to overcome the 0.5 Watt measuring threshold. When I also connected the doorbell transformer, the measured power increased by 0.20 Watt, from which I conclude the doorbell system now consumes about 0.2 Watt. First the power consumption was 2.45 Watt, so this is reduced by more then 10 times. The saving is 2.45 &#8211; 0.2 = 2.25 Watt. This is a saving of 19.7 kWh per year.<\/p>\n<p>The low power loss of the toroidal transformer can also be noticed when you touch the transformer with your fingers. You don&#8217;t feel any heat production, while the old transformers became quite warm.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>The energy consumption of an electrical doorbell is very inefficient. It uses energy 24 hours\/day while being used only a few seconds per day. In this article, I describe how I reduced the energy consumption of my doorbell.<\/p>\n","protected":false},"author":10,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[4],"tags":[],"_links":{"self":[{"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/posts\/888"}],"collection":[{"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/users\/10"}],"replies":[{"embeddable":true,"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/comments?post=888"}],"version-history":[{"count":8,"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/posts\/888\/revisions"}],"predecessor-version":[{"id":1361,"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/posts\/888\/revisions\/1361"}],"wp:attachment":[{"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/media?parent=888"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/categories?post=888"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/olino.org\/blog\/us\/wp-json\/wp\/v2\/tags?post=888"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}