Jac’s Koopman presents an AR111 led lamp with GU10 fitting. The lamp contains 7 leds emitting a warm white light. This lamp is dimmable.

This article shows the measurement results. Many parameters are also found in the Eulumdat file.

See this overview for a comparison with other light bulbs.

presents a spot ledlamp emitting warm white light, with a GU10 fitting. The lamp has a build-in ventilator to keep the lamp cool.

This article shows the measurement results. Many parameters are also found in the Eulumdat file.

See this overview for a comparison with other light bulbs.

presents a spot ledlamp emitting warm white light, with a GU10 fitting.

This article shows the measurement results. Many parameters are also found in the Eulumdat file.

See this overview for a comparison with other light bulbs.

presents a spot ledlamp emitting warm white light, with a GU10 fitting.

This article shows the measurement results. Many parameters are also found in the Eulumdat file.

See this overview for a comparison with other light bulbs.

presents a spot ledlamp emitting warm white light, with a GU10 fitting. This lamp is dimmable.

This article shows the measurement results. Many parameters are also found in the Eulumdat file.

See this overview for a comparison with other light bulbs.

presents an led MR16 spotlamp that emits warm white light. The lamp contains a little ventilator to effectively remove the heat and is also dimmable with help of a 12 V DC dimmer.

This article shows the measurement results. Many parameters are also found in the Eulumdat file.

See this overview for a comparison with other light bulbs.

presents an led MR16 spotlamp that emits warm white light.

This article shows the measurement results. Many parameters are also found in the Eulumdat file.

See this overview for a comparison with other light bulbs.

presents an led MR16 spotlamp that emits warm white light.

This article shows the measurement results. Many parameters are also found in the Eulumdat file.

See this overview for a comparison with other light bulbs.

presents a ledstring consisting of 140 RGB leds. With help of a controller one can select many light effects (only red, green or blue, or changing from one color to the other, or flickering etc). The selection “static white” (assumed that all three leds are maximally on) is chosen to do the measurement, this to get the maximum luminous flux.

This article shows the measurement results. Many parameters are also found in the Eulumdat file.

See this overview for a comparison with other light bulbs.

presents a ledtube emitting neutral white light. At each end of the tube there is a connector to connect this module to a 24 V DC voltage. And with the other side the 24 V can be extended to other modules, herewith enabling coupling multiple modules to each other.

This article shows the measurement results. Many parameters are also found in the Eulumdat file.

See this overview for a comparison with other light bulbs.