Montiss LS GU53 4W

Posted by Marcel van der Steen in Led lights, Light measurements No Comments»

vdbprod_lsgu53-4w Montiss gave a nice led spot for measurement. The lamp has a MR16/GU5.3 fitting, a beam angle of 30 degrees and a light flux output of about 200 lumen. Together with its warm white color this is a lamp that can be used for various purposes.

This article shows the measurement results. Many parameters are also found in the Eulumdat file.

See this overview for a comparison with other light bulbs.

Montiss LS GU10 4W

Posted by Marcel van der Steen in Led lights, Light measurements No Comments»

vdbprod_lsgu10-4w Montiss gave a nice led spot for measurement. The lamp gas a GU10 fitting, a beam angle of 30 degrees and a light flux output of about 150 lumen. Together with its warm white color this is a lamp that can be used for various purposes.

This article shows the measurement results. Many parameters are also found in the Eulumdat file.

See this overview for a comparison with other light bulbs.

Lioris Tubo T24120CWClear

Posted by Marcel van der Steen in Led lights, Light measurements No Comments»

lioris_tubo_t24120cwc presents a 120 cm long LED tube light. It contains a lot of intelligence, as it contains 4 preset dim positions. Following a switch protocol will enable selecting a dim position. This way it is possible to dim a shole set of tubes operated from the same switch. The lamp gives a cold white light with its 364 smd leds.

This article shows the measurement results. Many parameters are also found in the Eulumdat file.

See this overview for a comparison with other light bulbs.

CDE Technology BV Led Spot MR16 10W Neutral White with CLS 700 mA driver

Posted by Marcel van der Steen in Led lights, Light measurements No Comments»

cde_mr16_10w30deg presents a led spotlight with some power. With its 10 W a lot of light is generated. This light bulb emits light with neutral white color. It was used with a CLS current-driver set at 700 mA.

In a separate article this light bulb has been tested with a different brand current driver, set at 800 mA, and with a better efficacy. However this CLS driver has a better power factor. It shows that the customer can choose, and that the driver determines a number of the measured parameters.

This article shows the measurement results. Many parameters are also found in the Eulumdat file.

See this overview for a comparison with other light bulbs.

CDE Technology BV Led Spot MR16 10W Neutral White

Posted by Marcel van der Steen in Led lights, Light measurements No Comments»

cde_mr16_10w30deg presents a led spotlight with some power. With its 10 W a lot of light is generated. This light bulb emits light with neutral white color. It was used with a current-driver set at 800 mA and it has a dim-function which was tested.

In a separate article this light bulb has been tested with a different brand current driver, set at 700 mA, and with a better power factor. However without a dim-function and with a worse efficacy.

This article shows the measurement results. Many parameters are also found in the Eulumdat file.

See this overview for a comparison with other light bulbs.